Hydraulic swing-arm and fixed-arm cutting presses – SA F35 / SA F60
Key features
The SA F35 and SA F60 presses are the entry-level hydraulic presses in the extensive Suteau-Anver range. With their simple and robust design, they are dedicated to cutting flexible materials with dies in one or more layers and are the essential basic machine for any production workshop in leather goods, saddlery, footwear, clothing, and light industry.
The SA F35 offers a cutting area of 330 x 300 mm with a maximum force of 12 tons, a 125 mm cutting width, and a 70 mm arm stroke. Its table, supplied with a 600 x 300 mm block, ensures perfect stability in the workshop. Its compact footprint—750 x 750 mm and weighing 435 kg—makes it ideal for small workshops. The SA F60 offers a usable cutting area of 500 x 500 mm with a maximum cutting force of 27 tons, a 130 mm cutting depth, and an 85 mm arm stroke. Its table, supplied with a 1000 x 500 mm block, and its compact 1000 x 1000 mm footprint and 855 kg weight make it the ideal machine for higher-volume workshops. Both models are equipped with a rotary encoder potentiometer for adjusting the cutting power and are available in a rotating arm version—which completely frees up the work area between cuts—or a fixed arm version, depending on operator preference and production constraints.
Advantages of this machine
- Simple and robust design — minimal maintenance, maximum reliability in intensive workshop environments
- Rotating or fixed arm — configuration adaptable to operator preferences and workshop constraints
- 2 sizes available — SA F35 (12 T / 330×300 mm) and SA F60 (27 T / 500×500 mm) for all production volumes
- Potentiometer with encoder wheel — precise and repeatable cutting power adjustment
- Versatile entry-level machine — cuts all flexible materials with all types of dies
- Optional Allen Bradley touch control — intuitive operation and precise cycle control
- Available CE / Non-CE / single or three-phase — Adaptable to all markets and environments
- Made in France — designed and manufactured by Suteau-Anver, after-sales service provided directly by our technicians
Spare parts
Suteau-Anver has a centralized spare parts warehouse stocking more than 20,000 references, including our own machines as well as those of our partners for whom we handle distribution in France.
After-Sales Service
A Hotline service with extensive knowledge of machines and processes will help you perform an initial diagnosis and can, in certain cases and with your assistance, carry out remote troubleshooting.
- SA F35
- Maximum cutting power: 12 tons
- Through width: 125 mm
- Arm travel: 70 mm
- Usable cutting area: 330 x 300 mm
- Table supplied with butcher block: 600 x 300 mm
- Height: 1260 mm — Width: 750 mm — Depth: 750 mm — Weight: 435 kg
- SA F60
- Maximum cutting power: 27 tons
- Through width: 130 mm
- Arm travel: 85 mm
- Usable cutting surface: 500 x 500 mm
- Table supplied with a chopping block: 1000 x 500 mm
- Height: 1370 mm — Width: 1000 mm — Depth: 1000 mm — Weight: 855 kg
- Common to SA F35 and SA F60
- Potentiometer with rotary encoder
- Materials processed: paper, textiles, leather, gaskets, foam, plastic, carpet, wood, felt, rubber, and others
- Arm retention system after power failure
- External casing
- Underarm support
- Introduction table
- Allen Bradley type touch control
- Angled support for encoder wheel potentiometer
- Available in CE / Non-CE
- versions
- Available in single-phase or three-phase
- versions
- Available in swivel arm or fixed arm
- versions
- SA F35 — 12 T — 330 x 300 mm surface area
- SA F60 — 27 T — 500 x 500 mm surface area
Why choose Suteau-Anver?
With nearly 80 years of expertise, Suteau-Anver is the trusted partner for industrial companies worldwide.
Our commitment: to provide high-performance, innovative machines tailored to the specific needs of each client.
