Hydraulic mobile beam and table cutting and overcutting press – PTMV
Key features
This press, designed and manufactured by SUTEAU-ANVER, is robust and specifically designed for cutting all types of non-metallic materials. Its efficiency is due to its integrated hydraulic system.
A horizontal moving bridge moves forward and backward with each cut thanks to a hydraulic cylinder. This frees up the entire cutting area. The operator can then position the die and easily remove the cut parts. When necessary, and as an option, the tool can be placed under the bridge. In this case, the operator only retrieves the cut parts. In other words, on this machine, the cutting counterweights can be located either on the bridge or on the rising table.
The bridge’s retraction is adjustable on the touchscreen in 100 mm increments (configurable). The table rises vertically towards the bridge when it is in the forward position.
The machine is easy to use thanks to its touchscreen interface.
Productivity, efficiency, minimal maintenance, and safety are the key features of this overcutting press.
Advantages of this machine
- Programmed material feed via foot pedal control
- Soundproofing
- SUTEAU-ANVER construction is robust
- The bridge retraction is adjustable via the touchscreen in 100 mm increments (configurable)
- The table rises vertically towards the bridge when it is in the forward position
- The machine is easy to use thanks to its touchscreen interface
Spare parts
Suteau-Anver has a centralized spare parts warehouse stocking more than 20,000 references, including our own machines as well as those of our partners for whom we handle distribution in France.
After-Sales Service
A Hotline service with extensive knowledge of machines and processes will help you perform an initial diagnosis and can, in certain cases and with your assistance, carry out remote troubleshooting.
| Electrical power: | 400 Volts three-phase + Neutral + Ground 50Hz |
| Bridge speed, forward and backward: | 56 m/min |
| Bridge stopping accuracy: | +/-10 mm |
| Approach speed: | 167 mm/s non-adjustable |
| Cutting speed: | 22 mm/s non-adjustable |
| Opening speed : | 198 mm/s non-adjustable |
| Stroke: | 70 mm |
| Clearance between table and bridge (without tools and without a block): | 110 mm without a block |
| Working surface height: | 940 mm |
Useful cutting sizes and power:
- 1000×500 mm at 25 tons
- 1600×600 mm at 40 tons
- 2000×800 mm at 70 tons
- 2000×900 mm in 100 tonnes
- Double feed rollers
- Grip feed
- Roll holder (1 to 8 rollers or more upon request)
- Programmed material feed via foot pedal control
- Dimmable lighting
- Tool holder above the bridge
- Tool holder under the bridge
- Press without a band
- 3 pre-programmed cutting correction options
- Soundproofing
- RAL color painting
Why choose Suteau-Anver?
With nearly 80 years of expertise, Suteau-Anver is the trusted partner for industrial companies worldwide.
Our commitment: to provide high-performance, innovative machines tailored to the specific needs of each client.
