Automatic swing beam cutting press – Model FR

This press is the top of the range model in our range of swing beam presses.

The automatic beam makes it more ergonomic and less tiring for your operators to use, which in turn ensures greater productivity.

Power, high yield and silence are what make this press stand out.

Technical features :

  • Power 27 tons
  • Width of the swing beam from 380 mm to 610 mm
  • Stroke 100 mm
  • Sizes of the table delivered with block from 900x 450 to 1200×500 mm
  • EC standard guards
  • Cell barrier
  • Control display includes parameters for the arm’s cutting and rotation as well as assistance for  maintenance and the after sales service
2 Cutting modes :
  • Mode 1 – automatically controls the cutting point whatever the height of the cutters.
  • Mode 2 – controls the time taken by the swing beam to come down
  • For both modes, the cutting power can be adjusted using a potentiometer

Available in an EC standard / non EC standard / Single phase or three phase.

 Many options available on request :
  • Holding system for the arm once the power has been switched off
  • Control by “joysticks”
  • The handles can be inclined to 45°
  • Control by sensitive bar
  • Dimmable lighting
  • Discard container
  • Block can be taken out from the side
  • Trolley to hold the blocks
  • Stand
  • Storage for the dies